Hello all,
Currently working on a solution at the moment where I receive specific /25 routes via a leased line into the global routing table via EIGRP on a Cisco 2801.
I then need to inject these routes into a BGP VRF to be advertised onto BGP Peers within the VRF Network.
The /24 routes for the Site LAN are injected via Radius on the DSL Routers so this task makes the /25 more favourable via the Leased Line Router.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Bailey Stephen wrote:
Hello all,
Currently working on a solution at the moment where I receive specific
/25 routes via a leased line into the global routing table via EIGRP on
a Cisco 2801.
I then need to inject these routes into a BGP VRF to be advertised onto
BGP Peers within the VRF Network.
The /24 routes for the Site LAN are injected via Radius on the DSL
Routers so this task makes the /25 more favourable via the Leased Line
Router.
==================================================
IOS Version on 2801 (Router B) = Version 12.4(12a)
BGP VRF Config:
router bgp 65xxx
no synchronization
no bgp log-neighbor-changes
bgp scan-time 10
no auto-summary
!
address-family ipv4 vrf test1
redistribute connected
redistribute static
redistribute eigrp
?
==================================================
Simple Diagram attached
Routers C & D do not see the redistributed routes from Router B via BGP.
Not sure if this is an IOS Bug, but this should work??
You need support for "BGP Support for IP Prefix Import from Global Table
into a VRF Table"
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hirp_c/ch05/h_bgivt.htm
Support is available starting in 12.0(29)S, 12.2(25)S, and 12.3(14)T.
- --