RE: Smurf Amp Nets

These also can be situations where layer two devices have private
networks mixed in with public networks on the same VLAN. Remember
broadcast address translation between layer 3 & 2 through a
store-and-forward (or cut-through - any MIN type box will do this)
switch will generate MAC layer frames and deliver them out of each port
in the VLAN. I know broadcast pings on a Cisco device that is connected
to a switch, where the output interface has IP block A, and the VLAN has
IP blocks C, D, E, will result in replies from all networks connected to
the VLAN, not just the IP block configured on the router. This is why
on almost every attack we've seen here, there have been RFC 1918
addresses invlved as amplifiers.