Try making an ISDN call from one to the other at a 64k rate. If you can
get through then there are at least some trunks setup as ESF B8ZS clear
channel. I suspect that they are probably some older trunks running AMI
D4.
The other thing you could do is just ask them.
Where's the smiley face? You can't be serious in that last sentance. 2
out of 3 telcos are incapable of configuring circuits properly, and the
more they insist the signalling is set a particular way, the better the
odds are it's the other way.
> The other thing you could do is just ask them.
Where's the smiley face? You can't be serious in that last sentance. 2
out of 3 telcos are incapable of configuring circuits properly, and the
more they insist the signalling is set a particular way, the better the
odds are it's the other way.
The biggest problem is at least out here on the west coast.. the ILEC and
the CLEC's don't check the *Switch* configuration. They check the order,
and assume that the order was followed perfectly. I usually ahve to ask
3-10 times before they check the *switch* - and find it wrong.