I have seen a weird behaviour in case of pseudo wire termination, it keeps
on polling the destination ip even if the interface mapped to pseudo wire is
down.
Is it the normal behaviour?
Shivula,
You probably need to address your query to either your
vendor-specific mailing list, e.g.:
<https://puck.nether.net/mailman/listinfo/cisco-nsp>
<https://puck.nether.net/mailman/listinfo/juniper-nsp>
Or if you believe it's some protocol or specification
issue, the IETF's PWE3 WG mailing list:
<http://www.ietf.org/html.charters/pwe3-charter.html>
HTH,
-danny