According to for its mae-west router:

card inlet hotpoint exhaust
RSP(4) 26C/78F 38C/100F 44C/111F

Seems a little toasty to me.

This is the problem. MFS doesn't have proper cooling if the air if the
ambient air is this hot. It should be no higher than between 15C and 18C in
an equipment room like that.

Michael, c'mon...

15-18C? 19C is 66F -- that's very acceptable. 15C would be 59F!

In fact, 68F (at 40% RH) is pretty "standard" for most equipment rooms.
We're config'd for a setpoint of 67F +/- 1F and 40% RH +/- 3%.

One of our more heavily loaded 7513s shows at present:

card inlet hotpoint exhaust
RSP(6) 19C/66F 29C/84F 25C/77F

That's right where it should be.

BTW, exhaust temperature above hotpoint (which your stats show) is *not* a
good thing. I'd find out what's going on there -- you may have some kind
of obstruction with the airflow.