Hello Everyone,
I have a customer that is looking for a voip router. The router part
is easy however,
they need it to support their ADSL/VDSL connection PPoE, and all that lovely
stuff. Can you gents and ladies kindly recommend something that would fit
all. preferably the cisco route.
If you have one not in use, we would be interested in hearing from you.
Kind Regards,
Nick.
Hi Nick,
you can take a look to this model
http://www.cisco.com/en/US/prod/collateral/routers/ps380/ps10082/data_sheet_c78-682548.html
.
Contact me off list if you need more info.
Regards
Hi Nick,
Cisco 867VAE and 887VA are pretty fine routers.
Regards,
Remco Bressers
Signet B.V.
Something entirely different:
Draytek Vigor 2850, maybe?
Cheers
The Edgewater EdgeMarc 200 series has worked well for me. The ones that
I've used have 2xFXS and 1xFXO ports with ADSL. Lots of knobs in a fairly
sane web GUI.
We used the EM 200 series at my last job. They behaved reasonably well, especially considering the nutty scenarios we deployed them in.
If you're committed to Cisco, the 800 series is great as long as you don't intend to terminate TDM traffic and convert to SIP, transcode, or deploy any local voice services via the router such as conference bridging. Then you'd need something in the ISR/ISRG2 line w/ PVDMs installed.
Ooops, I should have mentioned. We do not need an ISDN gateway
(FXO/FXS). The connection is purely SIP. What is important is support
for ADSL/ADSL2 VDSL/VDSL2 and PPoE. Bell Canada......
N.
convert to SIP, transcode, or deploy any
local voice services via the router such as conference bridging. Then you'd
need something in the ISR/ISRG2 line w/ PVDMs installed.
Very interesting point! We would the router to do some transcoding yes, to take
some load off of the servers. That being said, we were originally looking at a
Cisco 3845 integrated router that allows for PVDM2, or 3900 that allow for
PVDM3 accompanied with VDSL2 and ADSL2 wan interface card.
Your feedback is greatly appreciated.
N.