Watchguards vs Junipers firewalls

Hi all - Has anyone out there had experience of running these firewalls near
1Gig speeds (mainly middle to large packets, not voice) between zones/ports,
if possible

Specifically we are looking at the Watchguard XTM535 and the Juniper

I am interested in experiences good and bad on either platforms and usage of
IDP/Weblocker etc on them.

We currently use SRX240 and Watchguard 1250e but have a need to increase the
throughput to nearly 1Gig.

Other criteria would be to be to do OSPF/BGP in high availability mode

Many thanks


SRX650 IDP caps at 1gb imix; BGP and OSPF in cluster won't be a
problem...but your running up against resource limits if you need to grow.
Juniper has a good write up on active active SRX deployments and offer 3gb
IDP imix on the 1400.