Dear Mark, group,
> Unfortunately we don’t have any testing done or experience with RPKI
> on XE or Classic boxes as we don’t have any deployed outside of OOB
> infrastructure.Cherish your blessings, and for the time being, keep them that way :-).
Since it was a quiet day in early April, Ben and I whipped up something
to generate config in industry standard format to mimic the RFC 6811
RPKI based BGP Origin Validation procedure. It uses the 'route-map'
configuration construct found in some older BGP implementations.
https://github.com/job/rpki-ov-route-map
We didn't test this in production, but I reckon you can upload the
generated output into the router's 'running-config' using a hourly
crontab, TFTP, RANCID, and expect(1). Here is an example config to
copy+paste. If we don't hear back from you we'll assume success.
(warning: large text file)
https://raw.githubusercontent.com/job/rpki-ov-route-map/master/example-route-map-configuration.txt
After applying the above you can reference 'rpki-ov' at each of your
EBGP peers as ingress policy: "neighbor x.x.x.x route-map rpki-ov in".
Be careful though, performance may not be as good as a native RPKI OV
implementation!
Cheers,
Job & Ben