Errors from a 7513..

Mailman List Mirror (Read Only)
1

%SYS-2-GETBUF: Bad getbuffer, bytes= 40470
-Process= "<interrupt level>", ipl= 1
-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
%SYS-5-CONFIG_I: Configured from console by vty1 (203.55.84.2)
%SYS-2-GETBUF: Bad getbuffer, bytes= 38198
-Process= "<interrupt level>", ipl= 1
-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
%SYS-2-GETBUF: Bad getbuffer, bytes= 62691
-Process= "<interrupt level>", ipl= 1
-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
%SYS-2-GETBUF: Bad getbuffer, bytes= 38118
-Process= "<interrupt level>", ipl= 1
-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state
to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial12/6, changed state
to up
%SYS-2-GETBUF: Bad getbuffer, bytes= 60021
-Process= "<interrupt level>", ipl= 1
-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00
%SYS-2-GETBUF: Bad getbuffer, bytes= 56788
-Process= "<interrupt level>", ipl= 1
-Traceback= 60159874 601C5FEC 601C8E18 601CB450 60196D00

I have been getting pages of these lately.

Its a 7513 w/ dual RSP2 modules and 64mb RAM. Its running IOS 11.2(8) P w/

1 SSIP controller (8 Serial).
1 VIP2 controller (1 FastEthernet)(4 Serial).
1 FastEthernet/IEEE 802.3 interface(s)
12 Serial network interface(s)

Has anyone on the list come across this before?

Adrian

2

RTFM:

http://www.cisco.com/univercd/data/doc/software/11_2/em/ess4t.htm#HDR16

Error Message:

%SYS-2-FREEBAD: Attempted to free memory at [hex], not part of buffer pool
%SYS-2-FREEFREE: Attempted to free unassigned memory

at[hex], alloc [hex] dealloc [hex]
%SYS-2-GETBUF: Bad getbuffer, bytes= [dec]
%SYS-3-HARIKARI: Process [chars] top-level routine exited
%SYS-2-HEADER: Attempt to return buffer with

invalid buffer header, ptr= [hex]

Explanation: An internal software error occurred.

Recommended Action If any of these messages recur, copy the message exactly
as it appears and contact your technical support representative for
assistance.

Randy

3

Can you paste a 'sh buff' in here as it looks like you are out of buffers.

- Aaron Hughes
- UltraNet Communications, Inc.
- aaronh@ultra.net.