Hello,
Could someone please explain how to boot from the 2nd partition in flash on
a cisco 4700? Is it even possible? Do I need to specify something in
rommon, in the config, or both? I was only able to get the router to boot
(from the first partition) by typing "boot flash: 2".
Any assistance would be greatly appreciated.
Here is what is in flash-
un-named#sh flash
System flash directory, partition 1:
File Length Name/status
1 2362132 c4500-p-mz_111-11.bin
[2362196 bytes used, 1832108 available, 4194304 total]
4096K bytes of processor board System flash (Read/Write)
System flash directory, partition 2:
File Length Name/status
1 2375940 c4500-p-mz_111-18.bin
[2376004 bytes used, 1818300 available, 4194304 total]
4096K bytes of processor board System flash (Read/Write)
This is how the config reads-
boot system flash c4500-p-mz_111-18.bin
boot system flash c4500-p-mz_111-11.bin
Thank you,
-Dan
Dan Caldwell Network Support Engineer dan@agis.net
Apex Global Internet Services (AGIS)
Network Operations Center - (313)730-5151
Business Office/Sales (313)730-1130 sales@agis.net
URL: http://www.agis.net/
If you follow the present day world,
you will turn your back on the Way;
if you would not turn your back on the Way,
do not follow the world.
-Takuan Soho.